The BlendMate | Usage Instructions
It's simple and takes only minutes - the result is a BEAUTIFULLY BLENDED Work-of-Art, instead of an unsightly jagged line! Paint differences on rounded corners should be blended to maintain the soft elegant look that Bullnose Corners provide a home.
painting outside corners, color transitions, Easiest way to paint corners, painting tips for corners, painting corners two colors, cutting in corners, painting, painting walls outside corners, color, blended color transitions, painting adjoining walls different colors, transition, bullnose, rounded, corner, corner painter, bull nose, line, mask, masking tape, decorator, painting roller, painting tool, room color, blending paint, create a blend, paint transition, color transition, abutting walls, differing colors, differing paint colors, differing paints, sundries, color change between rooms, drywall, painting walls with bullnose edges, how to paint bullnose
103
page-template-default,page,page-id-103,qode-quick-links-1.0,ajax_fade,page_not_loaded,,qode-title-hidden,qode-theme-ver-11.1,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive
Step by Step Instructions
The BlendMate™ is easy to load, easy to use, and easy to clean. Below are the basic steps involved in using the BlendMate™ — we recommend painting the two adjoining walls before painting the transition to ensure that solid color does not get onto the blended corner.
Step One
Load both Paint Chambers equally, return them to the tool and reinsert the drive screw.
Step Two
Turn the drive screw clockwise to force paint to the rollers while rolling the corner. Paint 12″ to 18″ portions at a time, painting toward the left wall, then to the right wall until the blend in the center is your desired width. Finish each section with a final light stroke down the center.
Step Three
Clean the tool. Remove the Roller Assembly and Paint Chambers from the tool and rinse each of the parts in warm running water.
After painting your blend a second coat may be required. The BlendMate™ can remain loaded for up to an hour, but the Roller Assembly must be cleaned immediately after use. Remove the Roller Assembly and rinse in warm water. Pat the Roller Assembly dry with a paper towel or painters rag. When the corner is ready for another coat, reinsert the Roller Assembly and repeat step two.
